D9T Track-Type Tractor Power Train – Track Adjuster – Install

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, “Caterpillar Tools and Shop Products Guide” for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1 g00682919

  1. Fasten a suitable lifting device to track adjuster (3). The weight of the track adjuster is approximately 113 kg (250 lb).
  1. Position the track adjuster in front of the front track roller frame. Slide the track adjuster into the front track roller frame.



    Illustration 2 g00682885

  1. Position cable assembly (2) and the spacer in position. Install bolt (1) .

End By:
Install the front track roller frame. Refer to Disassembly and Assembly, “Front Track Roller Frame – Install”.

Posted in D9Tagged