D9T Track-Type Tractor Power Train – Track Adjuster – Disassemble

Disassembly Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-4947     Hydraulic Cylinder Repair Stand     1    

Start By:

  1. Remove the track adjusters. See Disassembly and Assembly, “Track Adjuster – Remove”.



    Illustration 1 g00626596

  1. Put the track adjuster in position on tool (A) .
  1. Remove cylinder (2) and piston (3) from cylinder assembly (1) .



    Illustration 2 g00626597

  1. Remove spiral ring (5) and retainer ring (4) from the piston.



    Illustration 3 g00626598

  1. Remove seal assembly (6) from the piston.



    Illustration 4 g00626743

  1. Remove seal rings (7) and (8) from the seal.



    Illustration 5 g00626601

  1. Remove wear rings (9) from the cylinder.



    Illustration 6 g00626602

  1. Remove cylinder (2) from the piston.



    Illustration 7 g00626603

  1. Remove wear rings (10) from the inside of the cylinder.
Posted in D9Tagged