D9T Track-Type Tractor Hydraulic System – Steering Pump – Remove

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    

Start By:

  1. Remove the pump drive coupling.

------ WARNING! ------

Personal injury can result from hydraulic oil pressure and hot oil.

Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.

Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.


    Illustration 1 g02687417

  1. Disconnect hose assemblies (1) and (3). Disconnect harness assemblies (2) .

    Illustration 2 g02687436

  1. Disconnect hose assemblies (4) and (5) .

    Illustration 3 g02687456

    Illustration 4 g02687457

  1. Attach Tooling (A) and a suitable lifting device to steering pump (7). The weight of steering pump (7) is approximately 136 kg (300 lb).
  1. Remove bolts (6) and remove steering pump (7) from the machine.
Posted in D9Tagged