D6D TRACTOR POWER TRAIN – Universal Joint (Direct Drive And Special Application), Universal Joint (Power Shift)

Remove And Install Universal Joint (Direct Drive And Special Application)

1. Remove the floor plate from the machine.

2. Remove eight bolts (1) and universal joint (2).

NOTE: The following steps are for the installation of the universal joint (direct drive and special application).

3. Put the universal joint (2) in position between the flywheel clutch and transmission.

4. Install eight bolts (1) and tighten to a torque of 55 ± 7 N·m (40 ± 5 lb.ft.)

5. Install the floor plate.

Remove And Install Universal Joint (Power Shift)

1. Remove the floor plate from the machine.

NOTE: The brake control rod assemblies and steering clutch control rods are removed for better photo illustration of the universal joint.

2. Remove eight bolts (2) and universal joint (1).

NOTE: The following steps are for the installation of the universal joint (power shift).

3. Put universal joint (1) in position between the torque divider and transmission.

4. Install eight bolts (1) and tighten to a torque of 55 ± 5 N·m (40 ± 4 lb.ft.).

5. Install the floor plate.

Posted in D6Tagged