D6D TRACTOR POWER TRAIN – Adjustment Of Flywheel Clutch Brake (Direct Drive)

(1) Torque for the nut … 24 ± 7 N·m (18 ± 5 lb ft)

1. Move the control lever for the flywheel clutch to the most forward position. Loosen locknut (3). Turn rod (2) until the brake lining just comes in contact with the brake drum.

2. Move the control lever for the flywheel clutch to the released position. Turn rod (2) two revolutions in the clockwise direction. Tighten locknut (3) to keep the rod in position.

Posted in D6Tagged