Air Conditioning and Heating R-12 All Caterpillar Machines – Seat

Remove And Install Seat

1. Pull floormat (2) away from plate (1). Remove six bolts and lockwashers and remove the plate.

NOTE: Cab is tilted back for photo purposes.

2. Remove four bolts (3), washers and lockwashers which fasten the seat to the operator’s platform.

3. Remove seat (4) from the tractor.

4. Put the seat (4) in position on the operator’s platform.

5. Install four bolts (3), washers and lockwashers which fasten the seat to the operator’s platform.

6. Install plate (1) with six bolts and lockwashers.

Disassemble Seat

start by:

a) remove seat

1. Remove spring (4) from bracket (3). Remove two screws and lockwashers and remove bracket (3). Remove four screws (2) and lockwasher and remove bottom cushion assembly (1).

2. Remove six screws (6) and lockwashers and remove back cushion assembly (5) from brackets (7).

3. Remove spring (9), two rollers (8) and washers from left and right bracket assemblies (7).

Assemble Seat

1. Inspect frame assembly for worn or broken parts.

2. Install spring (3), two rollers (2) and washers on left and right bracket assemblies (1). Put the bracket assemblies in position in the frame assembly.

3. Install the back cushion assembly (4) on the left and right bracket assemblies (5) with six screws and lockwashers.

4. Install bottom cushion assembly (6) on the frame with four screws and lockwashers. Install bracket (7) with two screws and lockwashers. Install spring (8) on bracket (7).

end by:

a) install seat

Posted in D6Tagged