Air Conditioning and Heating R-12 All Caterpillar Machines – Adjustment Of Transmission Control Linkage (Power Shift)

NOTE: Do not adjust the linkage with engine running.

(1) Position directional lever (6) in forward detent.

(2) Position speed lever (5) in neutral detent.

(3) Position hand lever (10) in the middle of neutral slot of guide housing (9), (location “A” shown in view A-A).

(4) Assemble rod (2) and ends (3) and (8) to ends of levers (4) and (5).

(5) Position hand lever (10) in front of the forward slot in neutral (location “B” shown in view A-A).

(6) Assemble rod (12) and ends (11) to end of levers (6) and lever assembly (10).

(7) Adjust end (8) so lever (1) will move hand lever (10) to neutral position when lever (1) is moved to the downward position.

(8) Tighten nuts to a torque of … 12 ± 4 N·m (9 ± 3 lb ft)

Posted in D6Tagged