Air Conditioning and Heating R-12 All Caterpillar Machines – Adjustment Of Flywheel Clutch Control Linkage (Direct Drive)

1. Put control lever (1) in the ENGAGED position.

2. Make an adjustment to the length of rod (3) until dimension (A) between the center line of control rod (1) and the outer edge of cover (2), is … 125.0 ± 3.0 mm (4.92 ± 0.12 in)

3. Tighten locknuts (4) to a torque of … 45 ± 7 N·m (33 ± 5 lb ft)

(5) Torque for locknuts … 45 ± 7 N·m (33 ± 5 lb ft)

Posted in D6Tagged