3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS – Piston Cooling Orifices

Remove Piston Cooling Orifices

START BY:

a) remove crankshaft

1. Remove bearing (1).

2. Use a brass punch to remove piston cooling orifices (2) from the cylinder block.

Install Piston Cooling Orifices

1. Use tool (A) to install piston cooling orifice (1) in the cylinder block with the small end first.

2. Put a .090 in. (2.29 mm) rod through the piston cooling orifice to make sure that the passage is open after the piston cooling orifice is installed.

3. Install bearing (2).

END BY:

a) install crankshaft

Posted in D6Tagged