3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS – Lubrication Regulator Valve (Direct Drive and Special Application)

Remove And Install Lubrication Regulator Valve (Direct Drive And Special Application)

1. Remove the main floor plate from the machine.

2. Remove two bolts (1) and the washers. Remove regulator valve (2).

NOTE: The following steps are for the assembly of the lubrication regulator valve (direct drive and special application).

3. Install regulator valve (2) with two bolts (1).

4. Install the main floor plate.

Disassemble And Assemble Lubrication Regulator Valve (Direct Drive And Special Application)

Start By:

a. remove lubrication regulator valve (direct drive and special application)

1. Remove plug (2) and the gasket.

2. Remove spring (3) and valve (1).

3. Clean all of the parts of the lubrication regulator valve and coat with clean oil.

NOTE: Install in reverse order.

End By:

a. install lubrication regulator valve (direct drive and special application)

Posted in D6Tagged