3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL – Governor Housing (Scroll Fuel System – PC)

(1) Bore in the bearings (new) … .6230 ± .0005 in.(15.824 ± 0.013 mm)

Diameter of the shaft (new) … .6188 ± .0005 in.(14.718 ± 0.013 mm)

(2) Distance between the bearings for the governor control shaft … 2.385 ± .005 in.(60.58 ± 0.13 mm)

(3) Distance from the center line of the control group bolt holes to the end of the bearing for the governor control shaft … 1.075 ± .010 in.(27.30 ± 0.25 mm)

(4) Install seal with lip to the inside.

(5) Distance from face of housing to plug … .09 ± .02 in.(2.3 ± 0.5 mm)

Posted in D6Tagged