3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL – Governor Control For D7G With Direct Drive Transmission (Sleeve Metering Fuel System – PC)

Linkage Adjustment Procedure:

NOTE: With control lever in shutoff position and governor control shaft in shutoff position, put lever (4) on shaft at angle (D).

Angle (D) is … 20° ± 5°

Dimension (A) … 21.54 ± .04 in.(547 ± 1 mm)

Tighten nut (1) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Dimension (B) (approximately) … 23.5 in.(597 mm)

Tighten nuts (2) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Dimension (C) (approximately) … 18.9 in.(480 mm)

Tighten nut (3) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Posted in D6Tagged