3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL – Governor Control For D5B && D6D With Power Shift Transmission

Linkage Adjustment Procedure:

NOTE: With control lever in high idle position and governor control shaft in full on position, put lever (6) on shaft so that key slot in lever fits over key in shaft.

Dimension (A) (approximately) … 14.2 in.(361 mm)

Tighten nuts (1) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Dimension (B) (approximately) … 19.2 in.(487 mm)

Tighten nut (4) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Dimension (C) (approximately) … 22.9 in.(581 mm)

Tighten nut (5) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Adjust stop (2) so that engine speed, with decelerator pedal pushed all the way down, is … 825 ± 50 rpm

Tighten nut (3) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Dimension (D) … 15 in.(382 mm)

Check engine high idle speed after decelerator is adjusted. Make reference to FUEL SETTING INFORMATION.

Posted in D6Tagged