3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL – Governor Control For D5B & D6D With Direct Drive Transmission (Sleeve Metering Fuel System – PC)

Linkage Adjustment Procedure:

NOTE: With control lever in high idle position and governor control shaft in full on position, put lever (4) on shaft at angle (D).

Angle (D) is … 19°

Dimension (A) (approximately) … 14.2 in.(361 mm)

Tighten nut (1) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Dimension (B) (approximately) … 19.2 in.(488 mm)

Tighten nuts (2) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Dimension (C) (approximately) … 31.0 in.(787 mm)

Tighten nut (3) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Posted in D6Tagged