3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL – Governor Control For D5B & D6D With Direct Drive Transmission (Scroll Fuel System – PC)

Linkage Adjustment Procedure:

With control lever in high idle position and governor control shaft in full on position, put lever (4) on shaft so that key in shaft goes in slot in lever.

Dimension (A) (approximately) … 14.2 in.(361 mm)

Tighten nut (1) to … 20 ± 5 lb. ft.(25 ± 7 N·m)

Dimension (B) (approximately) … 19.2 in.(488 mm)

Tighten nuts (2) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Dimension (C) (approximately) … 31.0 in.(787 mm)

Tighten nut (3) to … 9 ± 3 lb. ft.(12 ± 4 N·m)

Posted in D6Tagged