153 & 163 HYDRAULIC CONTROL – Tank And Valve

Remove Control Valve

1. Remove the cover (1).

2. Remove tube assembly (2).

NOTE: Not necessary in the tank for a three valve hydraulic control.

3. Remove cotter pins and pins (3).

NOTE: Tank with a one spool valve has one cotter pin and pin (3).

4. Remove bolts (4) and the elbow.

5. Remove control valve (5).

Install Control Valve

1. Check to see that all of the O-ring seals are installed in the valve body.

2. Install the control valve (1).

3. Install bolts (2) and the elbow.

4. Install the tube assembly (3).

NOTE: Not necessary in the tank for a three valve hydraulic control.

5. Install the pins and cotter pins(4).

NOTE: Tank with one spool valve has one pin and cotter pin (4).

6. Install the cover (5).

Posted in D6Tagged